CS9950DS

Product

Home > Product > CS9950DS 60Aac/510mohm ground > Product details

Summary
Specification table
Selection
Product sample/
technical information

Summary

CS9950DS type programmable grounding resistance tester, adopts microcomputer controller to control the size of the output current and output current frequency;Tester output is constant current source output. the output current is within the scope of the tester , the size of the output current does not change along with the change of external load resistance, the output current value is set current value;Having open alarm function, equipped with PLC for signal input and output interface, easy to integrated test system with PLC, can also be equipped with RS232 interface, can accurately measure its resistance value of between all kinds of motors, electrical appliances, instruments and meters, household appliances, and so on the power supply of electrical equipment enclosure accessible metal parts and the protective earthing terminal.

uconstant current output: the output current stability factor range within 1%, avoid the unstable input power supply voltage and load change and make the output voltage change, the measured results is not accurate.

uopen circuit alarm function.

ufour-terminal method is used to measure and eliminate the influence of contact resistance.

uset low resistance deviation.

uwith resistance upper limit and lower limit alarm function, avoid to be measured by test line open circuit when a wrong result;

uset parameters with functions of power lost memories.

uWith functions of keeping low test parameters.

upreset: save the test parameters can be set up to 30 files, each file can be set up 99 test step.

uWith the keyboard lock, protect the test parameters by the operating personnel changes.

uFront panel calibration software, without opening the parameter calibration can be made.

uInterface PLC, optional RS232C, RS485, USB, GPIB interface.

u Household electrical appliances, television sets, refrigerators, air conditioners, washing machines, dehumidifiers, electric blanket, charger, etc

uInstruments: oscilloscope, signal generator, dc power supply, switching power supply, etc

uThe low lighting, ballast, road lights, stage lights, lantern and other kinds of lamps and lanterns

uElectric heating appliance: electric drill, ShouQiangZuan, cutting machine, grinding machine, grinding machine, welding machine, etc

uelectrical machine such as: . motor rotating motor and so on

uoffice equipment: computer, counterfeit detector, printer, copier, etc

IEC60335-1, UL60335-1 of household and similar electrical safety the first part: general requirements

UL60950, IEC60950 information technology equipment

UL60065, IEC60065 audio, video and similar electronic equipment safety requirements

IEC61010-1, measurement, control and laboratory use electrical equipment safety requirements Part 1: general requirements

Specification table

Model				CS9950DS
GR	Output current		range	1.0A～60.00A
			precision	Plus or minus 2% (value + 0.2 A)
			resolution	0.1A
	Maximum output power			360 w (60 a / 0.15 Ω)
	Largest output current			60A
	Resistance limit value		range	(10.0 ~ 510.0) m Ω Rset = a/Iset (60) x 150.0 m Ω
			precision	0.1 m Ω
			resolution	0.1 m Ω/Setp
	Resistance limit value	range		(0.0 ~ 510.0) m Ω 0 = Disable Rset = a/Iset (60) x 150.0 m Ω
		precision		0.1 m Ω
		resolution		0.1 m Ω/Setp
	Output waveform			Sine wave
	test time			0.3 s to 0.3 s 0 = continuous testing
	Time interval			0.0 s to 0.0 s 0 = time interval
grounding current meter	Measuring range			1.00A～60.00A
	resolution			0.01A
	precision			Plus or minus 2% (value + 0.2 A)
	show value			Root mean square value
Grounding resistance meter	range			0 ~ 510 m Ω
	precision			Current < 5.00 A is plus or minus 3% (value + 3 m Ω) current acuity 5.00 A for plus or minus (2% read value + 2 m Ω)
	resolution			0.1 m Ω
	Method of measurement			Four-terminal method
timer	range			0～999.9s
	resolution			0.1s
	precision			±（0.1%+50ms）

Selection

4-terminal test leads (red)	CS26011-1	standard	1PCS
4-terminal test leads (black)	CS26011-2	standard	1PCS
Power cord	CS26031-1	standard	1PCS
data connected cable	CS26023-1	standard	1PCS
USB interface cable	CS26027-1	standard	1PCS
Inspection box for GR tester	CS26035	optional	1PCS

Commodity search

会员登录

Search Category

Product

CS9950DS

Summary

Specification table

Selection

Product sample/technical information

Summary

Related products

Search Category

About US