CS9912Y Programmable hipot tester for medical apparatus

Product

Home > Product > CS9912Y Medical hipot > Product details

Series products: CS9912Y、CS9914Y

Summary
Specification table
Selection
Product sample/
technical information

Summary

·Electricity Safety Wall testing feature, detecting automatically whether the input power is correctly connected
·The frequency of output voltage and current could be ranged 50.0/60.0Hz
·After DCW testing, this tester can discharge within 0.2s quickly, this function protect the safety of users
·ACW test shift to DCW test automatically
·With the feature of lower limit of current alarm, prevent the miscarriage of justice of DUT caused by the open-circuit
·With key lock function, prevent the operator to modify the test parameters, which ensure that the DUT is tested in accordance with the set parameters
·Linear power amplifiers drive the output of sine wave voltage (current), crest factor range from 1.3 to 1.5
·240 * 64 graphics with LCD display, user-friendly interface design
·With Chinese and English display interface, which can meet the different needs of different users
·Save the pre-set test parameters set of 30 files and each file can be set up to 99 steps
·Programmable Hipot tester is equipped with oscilloscope interface. The DUT can be monitored arc ignition and flashover with the connected oscilloscope
·Open circuit voltage of grounding resistance is less t
·Optional RS232, RS485, USB, GPIB interface, standard PLC Interface

Specification table

Model					CS9912Y					CS9914Y
ACW	output voltage			range	0.050kV～5.000kV
				accuracy	±（2％read value+5V）
				resolution	1V
	Max output power				100VA（5.000kV/20mA）				500VA（5.000kV/100mA）
	Test current				20mA				100mA
	Low-current				0～20mA,0=not judged				0～100mA,0= not judged
	Range				200uA、2mA、20mA				200uA、2mA、20mA、100mA
	Waveform				Sine wave
	Distortion				≤2%（ Unloaded or resistance of the load ）
	Crest factor				1.3～1.5
	Waveform mode				DDS+ Power Amplifier
	Rise time				0.3s～999.9s 0= OFF
	Test time				0.3s～999.9s 0= Continuous
	Fall time				0.3s～999.9s 0= OFF
	Interval time				0.0s～999.9s 0= OFF
	Output mode				N mode、G mode
DCW	output voltage		range		0.05kV～6.000kV
			accuracy		±（2％ read value+5V）
			resolution		1V
	Maximum power				60W（6.000kV/10mA）			300W（6.000kV/50mA）
	Test current				10mA			50mA
	range				2uA、20uA、200uA、2mA、10mA			2uA、20uA、200uA、2mA、20mA、50mA
	Ripple coefficient				≤5%			≤5%
	Discharge time				≤200ms			≤200ms
	Maximum charge current				50mA			50mA
	Voltage rise time				0.3～999.9s 0=OFF
	Test time				0.3～999.9s 0= Continuous
	Voltage Fall time				0.3～999.9s 0= OFF
	Interval time				0.0～999.9s 0= OFF
	Delay alarm time				0.3～999.9s 0= OFF
	Output mode				N mode、G mode
Volt meter	range				0.050kV～5.000kV（AC） 0.050kV～6.000kV（DC）
	Accuracy				±（2％ read value+5V）
	Resolution				1V
	Displayed value				RMS
Ampere meter	range	AC			0 ～ 20mA		0 ～ 100mA
		DC			0 ～ 10mA		0 ～ 50mA
	resolution	AC			200uA：0.1uA, 2mA：1uA, 20mA：10uA , 100mA（50mA）:10uA
		DC			2uA：0.001uA， 20uA：0.01uA, 200uA：0.1uA, 2mA：1uA, 10mA：10uA	2uA：0.001uA， 20uA：0.01uA, 200uA：0.1uA, 2mA：1uA, 20mA：10uA 50mA：10A
	Accuracy				≥2mA ±（2%+5counts），<2mA ±（3%+5counts）
	Offset current				Current of test leads and accessories can be deducted.
	Mode				GND： RETURN port is connected to case FLOAT： RETURN port is not connected to case
Timer	Range				0～999.9s
	resolution				0.1s
	Accuracy				±（0.1%+50ms）

Selection

Test probe for programmable H.V. tester	CS26009-1	standard	1PCS
Test leads with clip for Programmable Hipot tester	CS26009-2	standard	1PCS
Test leads with clip for Programmable LC tester	CS26009-3	standard	1PCS
Double Q9 test leads	CS26018-1	standard	2PCS
Power cord	CS26031-1	standard	1PCS
data connected cable	CS26023-1	optional	1PCS
USB interface cable	CS26027-1	optional	1PCS
Inspection box for Hipot tester	CS26032	optional	1PCS

Commodity search

会员登录

Search Category

Product