CS9912YS Programmable Hipot Tester for Medical Apparatus

Product

Home > Product > CS9912YS Programmable Hipot Te > Product details

Series products: CS9912YS、CS9914YS

Summary
Specification table
Selection
Product sample/
technical information

Summary

CS9912YS, CS9914YS Hipot testerS for Medical Apparatus are equipped with oscillograph interface of observing flash or arc phenomenon. The output voltage adopts DDS plus power amplifier drive .The waveform is pure,samll distrotion,better than 2%. The system adopts hardware feedback,high speed MCU control technology,make output voltage stability range within 1%. ,test various medical equipment accurately and quickly. Equipped with RS232 interface, NEEDED RS232,RS485,GPIB interfaceit ,convinient to form communication system with computer

●Conform to IEC60601-1 medical standard requirements

●Leakage current、voltage、time display at the sane time

●The maximum time can reach 999

●The leakage current、test time can be set continuously

●With oscilloscope interface，can monitor DUT lighting pull arc and flashover phenomenon

Specification table

Model					CS9912YS					CS9914YS
ACW	Output voltage			range	0.050kV～5.000kV
				accuracy	±（2％read value+5V）
				resolution	1V
	Maximum output power				100VA（5.000kV/20mA）				500VA（5.000kV/100mA）
	Test current				20mA				100mA
	Low-current				0～20mA, 0=Not judged				0～100mA,0= not judged
	Range				200uA、2mA、20mA				200uA、2mA、20mA、100mA
	Waveform				Sine wave
	Distortion				≤2%（ Unloaded or resistance of the load ）
	Crest factor				1.3～1.5
	Waveform mode				DDS+ Power Amplifier
	Rise time				0.3s～999.9s 0= OFF
	Test time				0.3s～999.9s 0= Continuous
	Fall time				0.3s～999.9s 0= OFF
	Interval time				0.0s～999.9s 0= OFF
	Output mode				N mode、G mode
DCW	output voltage		range		0.05kV～6.000kV
			accuracy		±（2％ read value+5V）
			resolution		1V
	Maximum power				60W（6.000kV/10mA）			300W（6.000kV/50mA）
	Test current				10mA			50mA
	range				2uA、20uA、200uA、2mA、10mA			2uA、20uA、200uA、2mA、20mA、50mA
	Ripple coefficient				≤5%			≤5%
	Discharge time				≤200ms			≤200ms
	Maximum charge current				50mA			50mA
	Voltage rise time				0.3～999.9s 0=OFF
	Test time				0.3～999.9s 0= Continuous
	Voltage Fall time				0.3～999.9s 0= OFF
	Interval time				0.0～999.9s 0= OFF
	Delay alarm time				0.3～999.9s 0= OFF
	Output mode				N mode、G mode
Volt meter	range				0.050kV～5.000kV（AC） 0.050kV～6.000kV（DC）
	Accuracy				±（2％ read value+5V）
	Resolution				1V
	Displayed value				RMS
Ampere meter	range	AC			0 ～ 20mA		0 ～ 100mA
		DC			0 ～ 10mA		0 ～ 50mA
	resolution	AC			200uA：0.1uA, 2mA：1uA, 20mA：10uA , 100mA（50mA）:10uA
		DC			2uA：0.001uA， 20uA：0.01uA, 200uA：0.1uA, 2mA：1uA, 10mA：10uA	2uA：0.001uA， 20uA：0.01uA, 200uA：0.1uA, 2mA：1uA, 20mA：10uA 50mA：10A
	Accuracy				≥2mA ±（2%+5counts），<2mA ±（3%+5counts）
	Offset current				Current of test leads and accessories can be deducted.
	Mode				GND： RETURN port is connected to case FLOAT： RETURN port is not connected to case
Timer	Range				0～999.9s
	Resolution				0.1s
	Accuracy				±（0.1%+50ms）

Selection

Test probe for programmable H.V. tester	CS26009-1	standard	1PCS
Test leads with clip for Programmable Hipot tester	CS26009-2	standard	1PCS
Test leads with clip for Programmable LC tester	CS26009-3	standard	1PCS
Double Q9 test leads	CS26018-1	standard	2PCS
Power cord	CS26031-1	standard	1PCS
data connected cable	CS26023-1	standard	1PCS
USB interface cable	CS26027-1	standard	1PCS
Inspection box for Hipot tester	CS26032	optional	1PCS

Commodity search

会员登录

Search Category

Product