CS7620 Precision LCR meter

Product

Home > Product > CS7602 2MHz LCR meter > Product details

Series products: CS7602, CS7603, CS7605, CS7610, CS7620

Summary
Specification table
Selection
Product sample/
technical information

Summary

CS7600 series is high precision components parameter analyzer designed using automatic balance bridge principle .20 Hz ~ 2 MHZ test bandwidth,1uhz step, continuous random frequency settings, 0.01 m Ω ~ 100 m Ω impedance measurement range, 0.05% of the basic measurement precision and the automatic level control functions provided by equipment,lists scan/graphics scan and file sorting counting functions provide accurate and complete the survey and analysis for the vast majority of components and materials . Widely used in product research development, online testing , components incoming inspection and so on applications.

uFrequency measurement range

20 Hz ~ 2 MHZ frequency continuous, arbitrary setting, frequency resolution is 10 mu Hz.

high resolution and high accuracy

Six display resolution, the basic measurement accuracy up to + / - 0.05%

u15 kinds of impedance parameters, 23 kinds of parameter combination

Measurable capacitance (Cs/Cp), inductor (Ls/Lp) and resistance (Rs/Rp), dielectric loss (D), the quality factor (Q) impedance (| Z |), admittance (| | Y), the phase Angle (theta), conductance (Gp) and reactance (Xs), susceptance (Bp), the dc resistance * (Rdc, only CS7600X series can be measured ) each measurement shows two parameters at the same time.

Note: the subscript s - series model, the subscript p - in parallel mode

uSeparation (BIN) measurement

Options setting 10 sets sorting items, use the measured results filter the components to be tested

uLoad compensation function

With a reference sample compensate measure value. This function can guarantee the consistency of more instruments measuring .

uAutomatic level control function

In addition to the usual open circuit incentiving signal setting . In constant voltage/constant current mode, evaluate voltage/current characteristic of components. Signal level set range: 5 MVRMS ~ 2 VRMS / 50 ua ~ 20 ma

uAnalysis function List scanning test and graphics scan test

Provide 10 groups list scanning combination and 240 points/linear logarithmic graphics scan function; Can respectively set voltage, current, frequency offset voltage, offset current as a condition of scanning, evaluating the performance characteristics of components under various measuring conditions

Specification table

Model	CS7620	CS7620X	CS7610	CS7610X	CS7605		CS7605X	CS7603	CS7603X	CS7602	CS7602X
Test Frequency	20Hz～2MHz		20Hz～1MHz		20Hz～500kHz			20Hz～300kHz		20Hz～200kHz
Frequency accuracy	±0.01%
AC test level	5mVrms～2Vrms(Voltage mode) 1mV step
	5μArms～20mArms(Current mode) 10μA step
Int.DC bias level	0～2V(Voltage mode) 10mV step
	0～20mA(Current mode) 100μA step
Measurement Parameters	\|Z\|、\|Y\|、θ、Cs、Cp、Ls、Lp、Rs、Rp、X、 G、B、D、Q、Rdc(Only CS7600X series measurable)
Measurement display range	\|Z\|、R、X、Rdc 0.01mΩ～99.9999MΩ
	\|Y\|、G、B 0.01nS～99.9999S
	C 0.01fF～9.99999F
	L 0.01nH～99.9999kH
	D 0.00001～9.99999
	Q 0.00001～99999.9
	θ					DEG -179.999～179.999
						RAD -3.14159～3.14159
	△ 、% -999.999%～999.999%
Basic accuracy	Z±0.05% θ±0.0005
List sweep	At most 10 points
Graph sweep	At most 240 points
	Sweep mode linear/ logarithm
Measurement range	1/10/100/300/1k/3k/10k/30k/100k/300k/1M/10M
LCD	320×240
Dimensions	W×H×D＝450mm×135mm×355mm
Weight(Approx.)	6kg

Selection

4-terminal Kelvin test clip leads	CS76001	standard	1PCS
4-teminal test fixture（2 lock）	CS76003	standard	1PCS
Gilded shorting plat	CS76006	standard	1PCS
Power cord	CS26031-1	standard	1PCS

Commodity search

会员登录

Search Category

Product