南京长盛仪器有限公司

Model		CS36110A	CS36110B	CS36113A	CS36113B
Source output index	Frequency Range	1MHz～1000MHz		1MHz～1300MHz
	Frequency Stability	≤ ±5ppm
	Frequency Resolution	1Hz
	Output Level	-65dBm～+13dBm	38dBμV～116 dBμV	-65dBm～+13dBm	38dBμV～116 dBμV
	Level Precision	≤±1.5 dB
	Level Flatness	≤±0.5 dB
	Harmonic Control Ratio	≥ 30 dBc(5-1300MHz)
	System Impedance	50Ω	75Ω	50Ω	75Ω
Input Index	Dynamic Range	60dB(+13dBm～47 dBm)
	Amplitude Measurement Resolution	0.1dB
	Marker Resolution	0.01
Display Index	Display Logarithm Scale	1dB/DIV～10dB/DIV
	Display Resolution	0.02dB
	Sweep Time	600ms～20s / frame(501 点)
	Colorful TFT LCD	7.8 inches
	Frequency Marker and Function	Double channels，5 markers / channel
Measurement Function	Measurement Channel	3 channels (A, B, C), 2 tracks
	Measurement Format	Logarithm amplitude，SWR
	Sweep Mode	Linearity, CW
	Trigger Mode	Continuous, Single (EXT), Hold
	Store/Recall	6 States, 12 Tracks
Dimensions		W×H×D=430mm×185mm×370mm
Weight(Approx.)		7.8kg(net weight)10.8kg(shipping weight)

Product overview

◆ Product performance
CS361XX series network analyzer is framed with three divisions,
includingsource, input processing and display; all the three divisions have their own unique characteristics.
·Display; adopt 640*480 TFT LCD instead of traditional CRT, broad visual angle, clear graph. Test results in different channels are displayed by different colors, easy distinguished
·Source part adopts digital frequency synthesizing technology at the frequency resolution of up to 1Hz and ALC is implemented in signal
output, and output amplitude can be digital calibrated , which can assure amplitude flatness better than 0.5dB in full frequency ranges
·Input part; data processing is performed by DSP and CPLD, and dynamic range can reach 60dB. The input part includes 3 channels, two of which are active detecting input channels named by Channel A and B, and the other is direct inputting channel named by Channel C. The measured results of transmission and reflection characteristics can be displayed simultaneously. The instrument can provide 5 marks in each channel and store 6 groups of test states and test results, which all can be printed out
·The instrument can be widely applied in all kinds of network sweep in VHF and UHF range, Such as the measurement of
transmission and reflection characteristics of devices such as active or passive four-port network, filter, cable, and amplifiers, etc.
Especially the test of broadcasting television CATV. Special notice is when testing the reflection characteristics though the channel
B, the return loss and standing wave ratio can be measured and displayed directly through normalization processing, which is convenient
for users
·Impedance transducer needs applying in order to realize the conversion from 50Ω system to 75Ω system, and which depends on the
some necessary accessories
·Advanced Chinese and English operation interface, satisfying different customers with various requirements

Product accessories

◆ Standard accessories


       CS36001              CS36002          Power cord

【Print】【Close】